Book a Technology Review

Home/Insights/Warehouse Management Software at Fradley Park

Insights

Warehouse Management Software at Fradley Park

A pallet network hub, a retail DC and an automotive supplier need different warehouse systems. What each one actually requires.

17 September 2026

In short

What should warehouse software do for a business at Fradley Park?

Fradley Park holds a pallet network hub, retail distribution and automotive supply in 1.65 million sq ft, and those need different warehouse software. GTX Digital builds for the operation you actually run, starting with the one that has a deadline attached.

  • A pallet network hub is a sortation problem with a clock, not a storage problem.
  • Retail distribution lives or dies on the customer’s booking-in rules.
  • Automotive supply means sequence and traceability, not throughput.
  • The same square footage can mean three unrelated software requirements.
  • Trunking windows make the cutoff, not the pick rate, the thing to design around.

Think this applies to your business?

We will tell you straight whether it is worth doing, what it would take, and what we would do instead if it is not.

Book a technology review See what we do

Operating on the park? Book a technology review. Tell us your cutoff time and we can usually tell you where your system will fail.

Warehouse software advice usually assumes storage. On a park like Fradley, a lot of the operations barely store anything.

1.65m sq ftWarehousing across the park, on its published figures
173 acresThe site it sits on
3Unrelated warehouse requirements inside one estate

Three operations, one postcode

Fradley Park's named occupiers span retail, parcels, pallet networks, automotive and contract logistics — DHL, Geodis, Palletways, Faurecia and Hawkins Logistics among them, with other sources naming Tesco, Screwfix, ASOS, Yodel, Norgren and London City Bond.

In July 2026, Lichfield District Council's planning committee unanimously approved a £100m scheme combining a Palletways national headquarters with a distribution facility, reported as safeguarding 250 jobs.

So on one estate you have a pallet network, retail distribution and automotive supply. Those are three different software products wearing the same industrial cladding. The wider commercial picture is in software development for businesses at Fradley Park.

A pallet hub is a clock, not a warehouse

If you run or feed a network hub, almost nothing in standard WMS marketing applies to you.

Pallets arrive from member depots through the evening. They are sorted to outbound lanes by destination. They leave the same night. Storage is measured in hours.

What a storage WMS optimisesWhat a hub actually needs
Put-away location and travelLane assignment and load sequence
Stock accuracy over weeksPallet presence over minutes
Pick efficiencyMis-sort detection before departure
ReplenishmentTrailer fill and departure readiness

Get this wrong and you buy a good system that measures the wrong things while mis-sorts leave the building.

Retail distribution is shaped by somebody else's rules

If you supply grocers or large retailers, your warehouse system is partly designed by their booking-in requirements.

Delivery slots, ASN formats, pallet configuration, labelling standards, and penalties for arriving outside a window. None of that is negotiable and all of it has to be enforceable from your own system.

The practical test is simple. Can your system tell you, before the vehicle leaves, that this load will fail the customer's rules? If not, you find out at their gate.

Automotive supply cares about sequence

Faurecia-style automotive supply is a different discipline again.

The customer may want parts in build sequence, delivered to a line-side window, with full traceability by batch and date. Throughput matters far less than getting the right thing in the right order with evidence.

That means the system has to hold sequence as a first-class idea, not as a note in a despatch field.

What all three share

Three things, and they are where we usually start.

Scan at the point of handling rather than recording from memory afterwards. One identity per pallet that nothing else reuses. And every deadline modelled explicitly, so the system can warn rather than report.

Those three are cheap and they make everything after them possible.

Trunking windows change the design

On a park where most occupiers are feeding or receiving trunk movements, the cutoff is the organising fact of the day.

A system that treats despatch as the end of a process will tell you what happened. A system that treats the cutoff as the target will tell you, at four o'clock, which orders will not make it — while there is still time to do something.

That is often a small piece of logic rather than a new system, and it is the one people remember.

Rejections are the retail version of returns

If you supply large retailers, you will get rejections. Occasionally whole loads.

Wrong pallet height. A label the scanner would not read. Arrival outside the window. A date code outside their rule.

Each one is a vehicle coming back with stock that is now in an undefined state, and most systems have nowhere to put it.

Give rejected stock its own state and its own location. Then you can count it, decide about it, and argue about it with evidence rather than recollection.

The question that sorts suppliers

Ask any warehouse software supplier one thing. Show me what your system does at four o'clock when a load is going to miss the cutoff.

A good answer involves a screen somebody actually watches, with the orders at risk on it, updating.

A weak answer is a report you could run afterwards. Reports describe the past. On a park organised around departure times, you need the present.

Counting, when you barely hold stock

Perpetual counting assumes stock sits still. A cross-dock operation needs a different control: reconciliation by movement rather than by location.

Every pallet in, every pallet out, every exception named. If those three balance nightly, you do not need a stock count, because you never had stock.

What a first phase looks like

Working software doing one real job, live. Eight to sixteen weeks, usually the low tens of thousands.

Pick the deadline that costs money when missed, and build the thing that protects it. We do this as bespoke software development, with the local version on the Lichfield page.

Where this fits locally

Fradley sits north-east of Lichfield with the A38 feeding it and the M6 Toll and M42 within reach, which is why it draws national distribution rather than local trade.

We work with logistics and 3PL and distribution and wholesale businesses across this corridor, and the local picture is on the Lichfield page.

For the contract-site version of this question — what to do when the client names the system — see warehouse management software at Magna Park Lutterworth.

A reasonable first step

Write down your cutoff time. Then write down the latest moment you currently know whether you will hit it.

The gap between those two is your project, and on most sites it is measured in hours. Talk to us.

Common questions

Does one warehouse system suit the whole park?

No. A pallet hub sorts against a departure clock, a retail DC is shaped by its customers’ booking rules, and an automotive supplier needs sequence and traceability. Those are different products.

What is special about a pallet network hub?

Everything is timed. Pallets arrive from member depots, get sorted and leave the same night, so the system is managing a window rather than a stock holding.

We are a smaller occupier here. Where do we start?

With whichever deadline costs you money when you miss it. On this park that is usually a trunking cutoff or a customer booking slot.

All articles

Next step

Start with a technology review, not a proposal.

A short, structured conversation about where your systems are costing you time, margin or growth — and what the realistic options are. No pitch deck.